Kaneko Solenoid Valve

KANEKO SANGYO
SOLENOID VALVE 2-WAY

Kaneko Sangyo Solenoid Valve

Kaneko M20 Series Two Way Solenoid Valve

Kaneko’s new M20 Series Two-way Solenoid Valves have been developcd as 3 popular Type for use in The widest range Of applications.

Kaneko Solenoid Valve Features :
  • Highly airtight packless type
  • Even the general purpose type uses a costly mold coil and maintains high water tightness
  • Free installing position
  • Small power consumption
  • Easy maintenance due to
    simple construction.
Other Kaneko Valve Series :
Fluid water, oil, air, inert gas"
Working pressure Gas 0.05~0.9MPa Liquid0.05~1.6MPa
Differential pressure actuated 0.05MPa or more full-time
Fluid temperature -20℃~60℃
Ambient temperature -20℃~60℃(That the fluid does not freeze but)
Electrical ratings Continuity
The allowable voltage fluctuation rate +10%,-15%

Kaneko Sangyo Solenoid Valve

Kaneko M00DU Series Three Way Solenoid Valve

M00DU SERIES Using the double latch option, the valve is operated by means 01 a permanent magnet latch circuit that can be controlled by a momentary current pulse 01 fifty milliseconds.

Kaneko Solenoid Valve Features :
  • Capable of preventing
  • Changesin operation
  • By power failure
  • No loss in electric power
  • Economical and free from anxiety
Other Kaneko Valve Series :
Fluid Clean air
Fluid temperature -20~60℃
Ambient temperature -20~60℃
Duty cycle 100% Continously rated
Electrical Specification See below

KANEKO SANGYO
SOLENOID VALVE 3-WAY

Kaneko Sangyo Solenoid Valve

Kaneko M00DU Series Three Way Solenoid Valve

M00DU SERIES Using the double latch option, the valve is operated by means 01 a permanent magnet latch circuit that can be controlled by a momentary current pulse 01 fifty milliseconds.

Kaneko Solenoid Valve Features :
  • Capable of preventing
  • Changesin operation
  • By power failure
  • No loss in electric power
  • Economical and free from anxiety
Other Kaneko Valve Series :
ASME Classes 150 and 300
Primary seal type The block-and-bleed and double block-and-bleed
Secondary seat seals Metal-to-Metal

KANEKO
SOLENOID VALVE
3-WAY

 

KANEKO SANGYO
SOLENOID VALVE
4-WAY SINGLE

Kaneko Sangyo Solenoid Valve

Kaneko M15G Series Four Way Single Solenoid Valve

This Kaneko M15G valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve and other various pneumatic pressure operating devices.

Kaneko Solenoid Valve Features :
  • Operates without supply lubricating Oil
  • Corrosion proof treatment
Other Kaneko Valve Series :
Fluid Cleanair"
Working pressure 0.1 ~ 0.99MPa
Duty cycle 100% Continouly rated
Fluid temperature -20 ~ 60℃
Ambient temperature -20 ~ 60℃
Operating Volta range +10,-15%
Standard Voltage See below

KANEKO
SOLENOID VALVE
4-WAY SINGLE

Kaneko Sangyo Solenoid Valve

Kaneko M15G Series Four Way Single Solenoid Valve

This Kaneko M15G valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve and other various pneumatic pressure operating devices.

Kaneko Solenoid Valve Features :
  • Operates without supply lubricating Oil
  • Corrosion proof treatment
Other Kaneko Valve Series :
Fluid Cleanair"
Working pressure 0.1 ~ 0.99MPa
Duty cycle 100% Continouly rated
Fluid temperature -20 ~ 60℃
Ambient temperature -20 ~ 60℃
Operating Volta range +10,-15%
Standard Voltage See below

Kaneko Sangyo Solenoid Valve

Kaneko MK15DG Series Four Way Double Solenoid Valve

This Kaneko MK15DG valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve

Kaneko Solenoid Valve Features :
  • The main valve is of the spool type that requires no oil lubrication
  • Manual button provided as standard
  • Easy maintenance
  • Also available as 3 way valve
Other Kaneko Valve Series :
Fluid Air, Inert Gas
Working pressure 0.12 ~ 0.99MPa
Duty cycle 100% Continouly rated
Fluid temperature -20 ~ 60℃
Ambient temperature -20 ~ 60℃
Operating Volta range +10,-15%
Standard Voltage See below

KANEKO SANGYO
SOLENOID VALVE
4-WAY DOUBLE

Kaneko Sangyo Solenoid Valve

Kaneko MK15DG Series Four Way Double Solenoid Valve

This Kaneko MK15DG valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve

Kaneko Solenoid Valve Features :
  • The main valve is of the spool type that requires no oil lubrication
  • Manual button provided as standard
  • Easy maintenance
  • Also available as 3 way valve
Other Kaneko Valve Series :
Connection Size From 1/4" to 1"
PSI Ratings From 6,000 PSI to 10,000 PSI
Temperature 240 Deg C / 540 Deg C
Bore 0.21" (5.4mm)
Seat Metal to Metal

KANEKO
SOLENOID VALVE
4-WAY DOUBLE

 

KANEKO SANGYO
SOLENOID VALVE
MANUAL RESET

Kaneko Sangyo Solenoid Valve

Kaneko M81 Series Manual Reset Solenoid Valve

This Kaneko M81 valve is 3 Way Solenoid Valve are designed t0 be manual reset by a mechanical button and tripped by a Solenoid

Kaneko Solenoid Valve Features :
  • A kind of safety valve Capable of preventing malfunctioning
  • Coil and movable core do not come into contact with fluid.
  • Easy to operate manually
  • Available in two types ― no voltage release and electrically tripped.
Other Kaneko Valve Series :
Fluid Clean air
Working pressure 0 ~ 0.99MPa
Duty cycle 100% Continouly rated
Fluid temperature -20 ~ 60℃
Ambient temperature -20 ~ 60℃
Operating Volta range +10,-15%
Standard Voltage See below

KANEKO
SOLENOID VALVE
MANUAL RESET

Kaneko Sangyo Solenoid Valve

Kaneko M81 Series Manual Reset Solenoid Valve

This Kaneko M81 valve is 3 Way Solenoid Valve are designed t0 be manual reset by a mechanical button and tripped by a Solenoid

Kaneko Solenoid Valve Features :
  • A kind of safety valve Capable of preventing malfunctioning
  • Coil and movable core do not come into contact with fluid.
  • Easy to operate manually
  • Available in two types ― no voltage release and electrically tripped.
Other Kaneko Valve Series :
Fluid Clean air
Working pressure 0 ~ 0.99MPa
Duty cycle 100% Continouly rated
Fluid temperature -20 ~ 60℃
Ambient temperature -20 ~ 60℃
Operating Volta range +10,-15%
Standard Voltage See below

Kaneko Sangyo Solenoid Valve

Kaneko BZ11 Series Air-Operated Solenoid valve

This Kaneko BZ11 valve is Air-Operated Solenoid Valve is Emergency valve that are set by introducing signal air pressure and
pushing a palm button.

Kaneko Solenoid Valve Features :
  • In an emergency case the valve changes its operating position by spring action
  • When signal air pressure disappears the valve changes its operating
    position by spring action
  • When signal air pressure is led again the valve maintains its operating position unless the palm button is pushed
Other Kaneko Valve Series :
  • Kaneko Air-Operated Valve BZ10G Series
Fluid Clean air
Working pressure 0~0.99MPa
Fluid temperature -20~60℃
Signal air pressure range 0.06~0.14MPa
Operating Volta range +10,-15%

KANEKO SANGYO
SOLENOID VALVE
AIR OPERATED

Kaneko Sangyo Solenoid Valve

Kaneko BZ11 Series Air-Operated Solenoid valve

This Kaneko BZ11 valve is Air-Operated Solenoid Valve is Emergency valve that are set by introducing signal air pressure and
pushing a palm button.

Kaneko Solenoid Valve Features :
  • In an emergency case the valve changes its operating position by spring action
  • When signal air pressure disappears the valve changes its operating
    position by spring action
  • When signal air pressure is led again the valve maintains its operating position unless the palm
    button is pushed
Other Kaneko Valve Series :
  • Kaneko Air-Operated Valve
    BZ10G Series
Connection Size From 1/4" to 1"
PSI Ratings From 6,000 PSI to 10,000 PSI
Temperature 240 Deg C / 540 Deg C
Bore 0.21" (5.4mm)
Seat Metal to Metal

KANEKO
SOLENOID VALVE
AIR OPERATED

 

Supplier Air Operated

Kaneko Liquid Level Gauges

KANEKO SANGYO
LIQUID LEVEL

DIRECT

Supplier Direct

Kaneko Liquid Level Gauges

Kaneko G31 Direct Reading Type Liquid Level Gauges

Kaneko G31 Direct Reading Type Liquid Level Gauge unit can be replaced with liquid left in the tank because the automatic closing type isolating valve remains closed unless the control button is pushed.

Kaneko Liquid Level Features :
  • The maximum center-to-center
    distance is 3,030 mm.
  • Illuminators are available for a wide range of applications.
Other Kaneko Series :
Fluid Oil,Water
Max.Working pressure 0.27MPa(2.67bar)
Max.Liquid temperature 80℃

KANEKO
LIQUID LEVEL

DIRECT

Supplier Direct

Kaneko Liquid Level Gauges

Kaneko G31 Direct Reading Type Liquid Level Gauges

Kaneko G31 Direct Reading Type Liquid Level Gauge unit can be replaced with liquid left in the tank because the automatic closing type isolating valve remains closed unless the control button is pushed.

Kaneko Liquid Level Features :
  • The maximum center-to-center
    distance is 3,030 mm.
  • Illuminators are available for a wide range of applications.
Other Kaneko Series :
Fluid Oil,Water
Max.Working pressure 0.27MPa(2.67bar)
Max.Liquid temperature 80℃

Kaneko Liquid Level Gauges

Kaneko Dial Type Remote Transmission KL200 Liquid Level Gauges

Kaneko KL200 Dial Remote Transmission type, we are the ones by which float the float on the liquid surface, measured by the indicator was installed outside the tank

Kaneko Liquid Level Features :
  • General-purpose type adaptable to
    various specifications
  • Suited for side-wall mounting
Other Kaneko Series :
Measure range 6~20m
Seat 80A(3″)JIS5K
Contact (Microswitch) Back-mounted type

KANEKO SANGYO
LIQUID LEVEL

REMOTE

Supplier Remote

Kaneko Liquid Level Gauges

Kaneko Dial Type Remote Transmission KL200 Liquid Level Gauges

Kaneko KL200 Dial Remote Transmission type, we are the ones by which float the float on the liquid surface, measured by the indicator was installed outside the tank

Kaneko Liquid Level Features :
  • General-purpose type adaptable to
    various specifications
  • Suited for side-wall mounting
  • Only a scale graduated in units of
     height is available
Other Kaneko Series :
Connection Size ¼” through to ½”
PSI Ratings From 6,000 PSI to 10,000 PSI
Temperature 240 Deg C / 540 Deg C
Bore 0.21" (5.4mm)
Seat Metal to Metal

KANEKO
LIQUID LEVEL

REMOTE

 

Supplier Remote

KANEKO SANGYO
LIQUID LEVEL

FIELD TYPE

Supplier Field

Kaneko Liquid Level Gauges

Kaneko KL600 Dial Field Indicating Type Liquid
Level Gauges

Kaneko KL600 Dial Field Indicating Type, measured by the indicator was installed outside the tank to rise and fall of the liquid surface that occurs during the payout or stake out
of the contents.

Kaneko Liquid Level Features :
  • Mountable on top only.
  • Different detection systems are available for different applications.
Other Kaneko Series :
  • Kaneko Liquid Level Field KL400
  • Kaneko Liquid Level Field KL600
  • Kaneko Float Switchs LSM Series
  • Kaneko Float Switchs LSF Series
Measuring range 0.3~1.2m
Seat Perimeter and bolt pitch are 50A(2″) JIS10K. Special flange of 2-1/2″ (67.5 mm) inside diameter
Contact(Microswatch) Back-Embedded type
Contact capacity AC125V15A

KANEKO
LIQUID LEVEL

FIELD

Supplier Field

Kaneko Liquid Level Gauges

Kaneko KL600 Dial Field Indicating Type Liquid
Level Gauges

Kaneko KL600 Dial Field Indicating Type, measured by the indicator was installed outside the tank to rise and fall of the liquid surface that occurs during the payout or stake out of the contents.

Kaneko Liquid Level Features :
  • Suited for use with small tanks
    in 0.3~1.2 m sizes.
  • Mountable on top only.
  • Different detection systems are available for different applications.
Other Kaneko Series :
  • Kaneko Dial Type/Field Indicating
    Type KL400
  • Kaneko Dial Type/Field Indicating
    Type KL600
  • Kaneko Float Switchs LSM Series
  • Kaneko Float Switchs LSF Series
Measuring range 0.3~1.2m
Seat Perimeter and bolt pitch are 50A(2″) JIS10K. Special flange of 2-1/2″ (67.5 mm) inside diameter
Contact(Microswatch) Back-Embedded type
Contact capacity AC125V15A